ERR_SSL_VERSION_INTERFERENCE is a common SSL error that stops your browser from loading a secure website. You’ll usually see it in Chrome and Firefox when a page that works on other devices or networks suddenly fails. The error means the browser’s secure connection was disrupted during the TLS handshake, the process that sets up HTTPS. It often shows up when TLS 1.3 is involved, but the cause isn’t always your server.
In many cases, something between your browser and the website is interfering with the connection. The most common culprit is security software on your own computer. This guide covers the likely causes first, then the fixes in order from easiest to most involved.
What Causes ERR_SSL_VERSION_INTERFERENCE?
The error appears when the browser and the server can’t agree on a secure connection, or when something in the middle changes the handshake. The usual causes are:
- Antivirus or firewall HTTPS scanning: Some security programs intercept encrypted traffic with their own certificate and can break the handshake.
- VPNs, proxies, or network filters: Corporate, school, or public networks sometimes inspect traffic in ways that conflict with modern TLS.
- Outdated browser: An old browser may not support the TLS features your server expects.
- Server TLS configuration: On the website’s side, a server that supports only a narrow set of TLS versions or settings can cause the same failure.
Because the error can start on either end, work through the fixes below in order. Most people resolve it in the first two or three steps.
Step 1: Check Your Site’s SSL Configuration
If you run the website, start by testing its SSL setup. The report shows which TLS versions your server supports, whether the certificate chain is complete, and any known weaknesses. Fix any errors it reports, then reload the site.
For WordPress sites, the WP Encryption plugin makes this easier. It can scan your site’s SSL and HTTPS setup from your WordPress dashboard, flag common configuration problems such as mixed content or certificate issues, and walk you through advanced settings without editing server files by hand. If you’re not comfortable changing Apache or Nginx configuration, this is a safer place to start. It also helps confirm that your site redirects HTTP to HTTPS correctly, which prevents a whole class of SSL errors.
If you’re just visiting a site, this step won’t tell you much, but it’s still useful to know whether the problem appears on other devices or networks. If it works elsewhere, the issue is probably on your computer.
Step 2: Clear Your Browser Cache and Retry
Cached data can keep a broken connection state alive. Clear your browser’s cache and cookies for the site, or clear everything for the past few hours. Then restart the browser and try again.
Step 3: Update Your Browser
An outdated browser may not handle current TLS negotiation correctly. Update Chrome or Firefox to the latest version:
- Chrome: Go to the three-dot menu, then Help, then About Google Chrome.
- Firefox: Go to the menu, then Help, then About Firefox.
Restart the browser after updating.
Step 4: Check Your Antivirus and Firewall
This is the fix most likely to solve the problem on a personal computer. Many antivirus programs include an “HTTPS scanning,” “SSL scanning,” or “web protection” feature that intercepts encrypted traffic. Products such as Kaspersky, Avast, AVG, and Bitdefender have offered this option, and it can cause ERR_SSL_VERSION_INTERFERENCE.
To test it:
- Temporarily disable HTTPS or SSL scanning in your antivirus settings. Turning off the whole program is only a short test, so turn it back on afterward.
- Reload the site.
- If it loads, leave HTTPS scanning off, or check whether your antivirus has an update that fixes the compatibility issue.
Also check any VPN, proxy, or network-filtering software you use, and try disabling it briefly to see if the error goes away.
Step 5: Add TLS 1.2 Back on Your Server (For Site Owners)
If you manage the server and the error persists after the steps above, try allowing TLS 1.2 alongside TLS 1.3. TLS 1.3 is the stronger protocol, so keep it enabled. Supporting TLS 1.2 as well gives older clients and some middleboxes a version they can negotiate. Don’t disable TLS 1.3 to fix this error.
Apache: Open your Apache SSL configuration file, find the SSLProtocol line, and set it to:
SSLProtocol -all +TLSv1.2 +TLSv1.3
Nginx: Open your Nginx server block, find the ssl_protocols line, and set it to:
ssl_protocols TLSv1.2 TLSv1.3;
Test the configuration before restarting. For Apache, run apachectl configtest. For Nginx, run nginx -t. Then restart the service so the changes take effect:
sudo systemctl restart apache2
sudo systemctl restart nginx
Use httpd instead of apache2 on Red Hat-based systems. After restarting, rerun the SSL Labs test to confirm both protocols are enabled and the configuration is clean.
When to Get Further Help
If none of these steps works, test the site on a different device or network. If it loads elsewhere, the problem is almost certainly on your local machine or network. If it fails everywhere, the issue is on the server, and your hosting provider or system administrator can check the TLS configuration and certificate chain.
Frequently Asked Questions
Is it safe to disable TLS 1.3 to fix this error?
It’s not recommended. TLS 1.3 is more secure than earlier versions. Adding TLS 1.2 support is a safer server-side fix.
Does this error mean my site is hacked?
No. It indicates a failed secure connection, not a breach. Still, if the error appears on a site you didn’t expect to see it on, check that you’re visiting the correct address.
Why does the error appear only in Chrome or Firefox?
Both browsers enforce strict TLS rules and report handshake failures clearly, so they’re more likely to show this error. Other browsers may fail more quietly or handle the same problem differently.
